My project is to take a small vehicle and replace all the circuitry with a FabDuino with a Hope RF radio mounted over the ISP. It will use two reprogrammed helloHbridge boards with a combination of the Node board code and the Hbridge code. This will insure that when the FabDuino sends a signal through the line like a Node and the Bridges will read that and control the drive motors. I will also design a controller with two joysticks and a Radio to communicate with the vehicle. Also included on the car will be a sensor that when a button on the controller is pressed the car will read the value and send it back to the controller. This product is not planned to be sold commercially and is just something I wanted to do.